Install the HT-IRMON

Box Contents

Your box should contain:

• speaker

• 2 × grilles

• port plug

Ensure your mounting surface is able to hold three times the weight of the speaker.

Swipe to continue

Click to continue

Attach the grilles

Place the magnetic grilles over the speakers for protection during the install.

Remove the shorting bar (optional)

This speaker is designed for biamplification. If you wish to use it, loosen the nuts and remove the shorting bars (shown in yellow).

Attach the wires

Connect your wires to the speaker binding posts (strip the wires or use banana plugs).

Plug the rear port

If you will be placing this speaker in a cabinet or on a bookshelf, insert the foam plug in port at the rear of the speaker. This prevents unwanted buzzing caused by the cabinet or bookshelf.

Complete the Install

Place the speaker in the desired location, and you're done!